Is the BlackVue BOC-300 OBD-II Power Cable compatible with my dash cam and vehicle?Updated 2 hours ago
Vehicle Compatibility
In general, the BlackVue BOC-300:
- Supports most vehicles manufactured since 2010
- Is not compatible with non-standard OBD II ports, such as found in some Tesla models
- May not be compatible with some non-Tesla vehicles, including some Ford and Lincoln models
Please verify that your vehicle meets standard OBD-II specifications before purchasing. If you are unsure, contact our team and we'll be happy to help.
In general, the BlackVue BOC-300 should be compatible with the following vehicles:
| Vehicle Type | Compatible? |
| Gasoline / Diesel (2010+) | Yes |
| Hybrid (2010+) | Yes |
| Electric (non-Tesla, 2010+) | Yes |
| Tesla (all models) | No |
| Ford / Lincoln | Verify First |
| Pre-2010 / Non-OBD-II | Verify First |
The following is a dynamic list of vehicles we have tested and verified compatibility for:
| Vehicle Tested | Compatible? |
| 2020+ Ford Explorer | No |
| 2020+ Lincoln Aviator | No |
Dash Cam Compatibility
All BlackVue dash cams that have a built-in voltage monitor are supported. In other words, the BOC-300 supports most models since the DR750X/DR900X Series. If your BlackVue dash cam came with a Hardwiring Power Cable (with yellow, red and ground wires), then it is compatible with the OBD II Power Cable.
Compatible BlackVue Models Include:
- Elite 10 Series
- Elite 9 Series
- Elite 8 Series
- DR970X Plus Series (II)
- DR970X LTE Plus Series (II)
- DR970X Box Plus Series
- DR770X Series (II)
- DR770X LTE Series
- DR770X Box Series
- DR590X Plus Series
- DR590X Series
- DR970X Series
- DR970X LTE Series
- DR900X Plus Series
- DR750X Plus Series (except LTE)
- DR900X Series
- DR750X Series (except LTE)
This cable is not compatible with older BlackVue models that do not have a built-in voltage monitor. Please verify that your dash cam is on the list above before purchasing.