BlackboxMyCar logo
BlackboxMyCar logo

All articles

A329/A329S/A329T Series

Why isn't the 4K 60fps recording option available on my VIOFO A329/A329S/A329T dash cam?

Please make sure that HDR is turned off in the settings. When HDR is enabled, the camera only supports up to 4K 30fps, and 4K 60fps will not be available. We love hearing from our customers, and we'd love to get your feedback to further improve your

What is the Hybrid Parking Mode on the VIOFO A329S and A329T dash cams?

Hybrid Parking Mode is a new, advanced parking mode feature exclusive to the VIOFO A329S and A329T dash cams. To enable it, you must be using the HK6 hardwiring kit. Hybrid Parking Mode takes advantage of the HK6's voltage detection capabilities and

Why is the Low Power Impact Detection parking mode not available on my VIOFO A329S/A329T dash cam?

The Low Power Impact Detection parking mode is only available if you are using an HK4 or HK6 hardwiring kit or spliced battery pack output cable. If you are hardwired or using a battery pack with a spliced output cable, and Low Power Impact Detection

My 4TB Solid-State Drive (SSD) isn't working with my A329/A329S/A329T series dash cam. What do I do?

This typically occurs when the solid-state drive does not have the correct file format, partition table layout, or partition map for the dash cam, and the dash cam is unable to format the drive itself. To get your VIOFO dash cam to recognize the SSD

Is the VIOFO HK4 hardwiring kit compatible with the A329S and A329T? Why don't you sell an HK6 spliced cable for battery packs?

Yes, the HK4 hardwiring kit is fully compatible with the A329S and A329T dash cams, but functionality will be limited compared to using it with the HK6. You will still be able to use most of the standard parking modes, including the new Low Power Imp

My VIOFO A329S/A329T dash cam is not detecting the HK6 hardwiring kit. What should I do?

If your A329S/A329T dash cam is not detecting the HK6 hardwiring kit, especially if it was previously used with another HK6 that was replaced or left behind in another vehicle, please reset it to the default settings to ensure it pairs with the new H